Physics-Informed Optimization of 3D-Printed Tissue Scaffolds for Enhanced Cell Growth and Mechanical Stability
Keywords:
physics-informed optimization; tissue scaffolds; nutrient transport; mechanobiology; additive manufacturing; robust designAbstract
Three-dimensional printed tissue scaffolds must satisfy a coupled set of biological and mechanical requirements: interconnected porosity for nutrient transport and cell migration, pore dimensions that support cell activity, sufficient stiffness and strength for load transfer, and geometric features that remain manufacturable at printer resolution. Design methods that optimize only porosity or only stiffness tend to produce architectures that are locally favorable but globally inconsistent, especially when transport limitation, mechanobiological response, and print-path constraints interact. This manuscript develops a physics-informed optimization framework for scaffold architecture that treats these requirements as a single PDE-constrained design problem. The design field is a relative density distribution together with a characteristic pore diameter. A reaction-diffusion model represents oxygen or nutrient transport and consumption, a mechanobiological growth law links local nutrient availability and mechanical stimulus to predicted cell density, and effective stiffness and local yield constraints represent mechanical stability. The optimization objective combines predicted cell growth, effective stiffness, and solid volume, while printability enters as explicit constraints on minimum feature size, overhang, and path continuity. The framework also includes a robust formulation that penalizes sensitivity to uncertain transport and mechanical parameters. The main analytical insight is that feasible scaffolds occupy a narrow transport-mechanics trade-off region in which graded density and coordinated pore-size selection outperform uniform porosity. The formulation provides a defensible basis for design ranking and for selecting measurable validation endpoints before fabrication.
References
1. Hollister, S. J. (2005). Porous scaffold design for tissue engineering. Nature Materials, 4(7), 518–524.
2. Hutmacher, D. W. (2000). Scaffolds in tissue engineering bone and cartilage. Biomaterials, 21(24), 2529–2543.
3. Karageorgiou, V., & Kaplan, D. (2005). Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials, 26(27), 5474–5491.
4. O'Brien, F. J., Harley, B. A., Yannas, I. V., & Gibson, L. J. (2005). The effect of pore size on cell adhesion in collagen-GAG scaffolds. Biomaterials, 26(4), 433–441.
5. Sengers, B. G., Taylor, M., Please, C. P., & Oreffo, R. O. C. (2007). Computational modelling of cell spreading and tissue regeneration in porous scaffolds. Biomaterials, 28(10), 1926–1940.
6. Lin, C. Y., Kikuchi, N., & Hollister, S. J. (2004). A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity. Journal of Biomechanics, 37(5), 623–636.
7. Bendsoe, M. P., & Sigmund, O. (2004). Topology optimization: Theory, methods, and applications. Springer.
8. Yu, L., & Luo, D. (2018). Mesh optimisation for spatial wireframe robotic 3d printing. International Journal of Rapid Manufacturing, 7(2-3), 169-185.
9. Gibson, L. J., & Ashby, M. F. (1997). Cellular solids: Structure and properties (2nd ed.). Cambridge University Press.
10. Ashby, M. F. (2006). The properties of foams and lattices. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 364(1838), 15–34.
11. Hollister, S. J., Maddox, R. D., & Taboas, J. M. (2002). Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. Biomaterials, 23(20), 4095–4103.
12. Raissi, M., Perdikaris, P., & Karniadakis, G. E. (2019). Physics-informed neural networks: A deep learning framework for solving forward and inverse problems involving nonlinear partial differential equations. Journal of Computational Physics, 378, 686–707.
13. Karniadakis, G. E., Kevrekidis, I. G., Lu, L., Perdikaris, P., Wang, S., & Yang, L. (2021). Physics-informed machine learning. Nature Reviews Physics, 3(6), 422–440.
14. Galban, C. J., & Locke, B. R. (1999). Analysis of cell growth kinetics and substrate diffusion in a polymer scaffold. Biotechnology and Bioengineering, 65(2), 121–132.
15. Croll, T. I., Gentz, S., Mueller, K., Davidson, M., O'Connor, A. J., Stevens, G. W., & Cooper-White, J. J. (2005). Modelling oxygen diffusion and cell growth in a porous, vascularising scaffold for soft tissue engineering. Chemical Engineering Science, 60(17), 4924–4934.
16. Sun, W., Starly, B., Darling, A., & Gomez, C. (2004). Computer-aided tissue engineering: Overview, scope and challenges. Biotechnology and Applied Biochemistry, 39(1), 29–47.
17. Giannitelli, S. M., Accoto, D., Trombetta, M., & Rainer, A. (2014). Current trends in the design of scaffolds for computer-aided tissue engineering. Acta Biomaterialia, 10(2), 580–594.
18. Egan, P. F., Gonella, V. C., Engensperger, M., Ferguson, S. J., & Shea, K. (2017). Computationally designed lattices with tuned properties for tissue engineering using 3D printing. PLOS ONE, 12(8), e0182902.
19. Bessa, M. A., Bostanabad, R., Liu, Z., Hu, A., Apley, D. W., Brinson, C., Chen, W., & Liu, W. K. (2017). A framework for data-driven analysis of materials under uncertainty: Countering the curse of dimensionality. Computer Methods in Applied Mechanics and Engineering, 320, 633–667.
20. Murphy, C. M., & O'Brien, F. J. (2010). Understanding the effect of mean pore size on cell activity in collagen-glycosaminoglycan scaffolds. Cell Adhesion & Migration, 4(3), 377–381.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Bioinformatics Insights and Analytics

This work is licensed under a Creative Commons Attribution 4.0 International License.