AI-Assisted Design of Robotic Healthcare Facility Construction Systems for Improving Operational Efficiency and Infection Control

Authors

  • Michal Kleczar Department of Computer Science, George Mason University, Fairfax, VA, USA.
  • Maria Pilar Canet Department of Computer Science and Engineering, University at Buffalo, Buffalo, NY, USA.
  • Maks Gabryel School of Electrical Engineering and Computer Science, Oregon State University, Corvallis, OR, USA.

Keywords:

healthcare construction, construction robotics, infection control, physics-informed machine learning, digital twin, multi-objective optimization

Abstract

Healthcare facility construction and renovation create coupled operational and infection-control problems: airborne and surface contamination must be contained while schedules, material flows, and robotic tasks are coordinated in constrained clinical environments. Existing construction-robotics research has advanced task automation and on-site autonomy, and healthcare design research has established environmental controls for infection prevention, but these bodies of knowledge are rarely combined in a single design model. This manuscript develops an AI-assisted co-design framework for robotic healthcare facility construction systems that treats infection control as a dynamic constraint on robotic planning rather than as a post hoc environmental add-on. The framework represents the construction state through a building-information-model graph, robot fleet states, environmental fields, contamination estimates, and human activity; it couples task allocation and sequencing with a physics-informed airflow and infection-risk surrogate, then solves a multi-objective problem over completion time, infection risk, energy use, and disruption under uncertainty. The central methodological contribution is the formulation of robot-oriented construction design as a constrained, partially observable decision problem in which ventilation zoning, material logistics, and robot paths are optimized jointly. Analytical assessment shows why efficiency gains from robot density and parallel task execution can be offset by contaminant resuspension, pressure imbalance, and schedule fragility when infection-control constraints are ignored. The framework provides a defensible basis for designing robotic construction systems that are both operationally efficient and compatible with healthcare infection-prevention requirements, while identifying calibration, validation, and human-oversight conditions necessary for practical use.

References

1. World Health Organization. (2009). Natural ventilation for infection control in health-care settings. World Health Organization.

2. Centers for Disease Control and Prevention. (2003). Guidelines for environmental infection control in health-care facilities. MMWR Recommendations and Reports, 52(RR-10), 1–42.

3. Ulrich, R. S., Zimring, C., Zhu, X., DuBose, J., Seo, H.-B., Choi, Y.-S., Quan, X., & Joseph, A. (2008). A review of the research literature on evidence-based healthcare design. HERD: Health Environments Research & Design Journal, 1(3), 61–125.

4. Li, Y., Leung, G. M., Tang, J. W., Yang, X., Chao, C. Y. H., Lin, J. Z., Lu, J. W., Nielsen, P. V., Niu, J., Qian, H., Sleigh, A. C., Su, H. J. J., Sundell, J., Wong, T. W., & Yuen, P. L. (2007). Role of ventilation in airborne transmission of infectious agents in the built environment—A multidisciplinary systematic review. Indoor Air, 17(1), 2–18.

5. Qian, H., Li, Y., Nielsen, P. V., Hyldgaard, C. E., Wong, T. W., & Chwang, A. T. Y. (2006). Dispersion of exhaled droplet nuclei in a two-bed hospital ward with three different ventilation systems. Indoor Air, 16(2), 111–128.

6. ASHRAE. (2017). Ventilation of health care facilities (ANSI/ASHRAE/ASHE Standard 170-2017). ASHRAE.

7. Bock, T., & Linner, T. (2016). Construction robots: Elementary technologies and single-task construction robots. Cambridge University Press.

8. Saidi, K. S., O'Brien, J. B., & Lytle, A. M. (2008). Robotics in construction. In B. Siciliano & O. Khatib (Eds.), Springer handbook of robotics (pp. 1079–1099). Springer.

9. Melenbrink, N., Werfel, J., & Menges, A. (2020). On-site autonomous construction robots: Towards unsupervised building. Automation in Construction, 119, 103312.

10. Petersen, K. H., Napp, N., Stuart-Smith, R., Rus, D., & Kovac, M. (2019). A review of collective robotic construction. Science Robotics, 4(28), eaau8479.

11. Sacks, R., Eastman, C., Lee, G., & Teicholz, P. (2018). BIM handbook: A guide to building information modeling for owners, designers, engineers, contractors, and facility managers (3rd ed.). Wiley.

12. Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C. (2019). Digital twin in industry: State-of-the-art. IEEE Transactions on Industrial Informatics, 15(4), 2405–2415.

13. Raissi, M., Perdikaris, P., & Karniadakis, G. E. (2019). Physics-informed neural networks: A deep learning framework for solving forward and inverse problems involving nonlinear partial differential equations. Journal of Computational Physics, 378, 686–707.

14. Luo, D., & Yu, L. (2021). From factory to site—designing for industrial robots used in on-site construction. In Automating cities: design, construction, operation and future impact (pp. 87-109). Singapore: Springer Singapore.

15. LeCun, Y., Bengio, Y., & Hinton, G. (2015). Deep learning. Nature, 521(7553), 436–444.

16. Sutton, R. S., & Barto, A. G. (2018). Reinforcement learning: An introduction (2nd ed.). MIT Press.

17. Brunton, S. L., Proctor, J. L., & Kutz, J. N. (2016). Discovering governing equations from data by sparse identification of nonlinear dynamical systems. Proceedings of the National Academy of Sciences, 113(15), 3932–3937.

18. Morawska, L., Tang, J. W., Bahnfleth, W., Bluyssen, P. M., Boerstra, A., Buonanno, G., Cao, J., Dancer, S., Floto, A., Franchimon, F., Haworth, C., Hogeling, J., Isaxon, C., Jimenez, J. L., Kurnitski, J., Li, Y., Loomans, M., Marks, G., Marr, L. C., ... Yao, M. (2020). How can airborne transmission of COVID-19 indoors be minimised? Environment International, 142, 105832.

19. Bartley, J. M., Olmsted, R. N., & Haas, J. P. (2010). Current views of health care design and construction: Practical implications for safer, cleaner environments. American Journal of Infection Control, 38(5), S1–S12.

20. Jones, D., Snider, C., Nassehi, A., Yon, J., & Hicks, B. (2020). Characterising the digital twin: A systematic literature review. CIRP Journal of Manufacturing Science and Technology, 29, 36–52.

Downloads

Published

2026-10-21

How to Cite

Michal Kleczar, Maria Pilar Canet, & Maks Gabryel. (2026). AI-Assisted Design of Robotic Healthcare Facility Construction Systems for Improving Operational Efficiency and Infection Control. Bioinformatics Insights and Analytics, 4(3). Retrieved from https://bioinfia.org/index.php/home/article/view/237